Continuously Hot-Dip Coated Steel Flat Products
Continuously hot-dip flat rolled products | Aluminium-zinc alloy coated (+AZ)

Continuously hot-dip flat rolled products | Aluminium-zinc alloy coated (+AZ) | High strength steels

these products are characterised by guaranteed minimum yield, rupture and elongation limits.

They are coated products, which are ideal for cold forming, from bending to moulding, while maintaining high resistance values; they are suitable for obtaining resistant and resilient parts, in complex and lightened shapes, are their thicknesses can be reduced. They are widely used, for example, in the automobile and shelving sectors.

The tables below show only the main characteristics of the products listed and not all the technical supply conditions. For further details, please refer to the full contents of the standards mentioned on this page.


Condizioni tecniche di fornitura: EN 10346:2015

Tolleranze dimensionali e di forma: EN 10143:2006

CARATTERISTICHE MECCANICHE (Ved. note (*))

QUALITA’ Tipo
Rivestimento
CARATTERISTICHE MECCANICHE (Ved. note (*))
Re/ Rp0,2%
(Mpa)
min.
Rm
(Mpa)
min.
A%
min.
L0=80 mm
A%
min.
L0=80 mm
A%
min.
L0=80 mm
Spessore (S) 0,35<=S<=3,0 0,35<=S<=3,0 0,35<S<=0,5 0,5<S<=0,7 0,70<S<=3,0
S220GD +Z, +ZM, +AZ 220 300 – 440 16 18 20
S250GD +Z, +ZM, +AZ, +AS 250 330 – 470 15 17 19
S280GD +Z, +ZM, +AZ, +AS 280 360 – 500 14 16 18
S320GD +Z, +ZM, +AZ, +AS 320 390 – 530 13 15 17
S350GD +Z, +ZM, +AZ, +AS 350 420 – 560 12 14 16
S390GD +Z, +ZM, +AZ 390 460 – 600 12 14 16
S420GD +Z, +ZM, +AZ 420 480 – 620 11 13 15
S450GD +Z, +ZM, +AZ 450 510 – 650 10 12 14
S550GD +Z, +ZM, +AZ 550 560

 

(*) Si applica il provino (L) parallelo alla direzione di laminazione.

ANALISI CHIMICA COLATA (Valori % max.)

QUALITA’ Tipo
Rivestimento
ANALISI CHIMICA COLATA (Valori % max.)
C Mn Si P S
S220GD +Z, +ZM, +AZ 0,200 1,700 0,600 0,100 0,045
S250GD +Z, +ZM, +AZ, +AS 0,200 1,700 0,600 0,100 0,045
S280GD +Z, +ZM, +AZ, +AS 0,200 1,700 0,600 0,100 0,045
S320GD +Z, +ZM, +AZ, +AS 0,200 1,700 0,600 0,100 0,045
S350GD +Z, +ZM, +AZ, +AS 0,200 1,700 0,600 0,100 0,045
S390GD +Z, +ZM, +AZ 0,200 1,700 0,600 0,100 0,045
S420GD +Z, +ZM, +AZ 0,200 1,700 0,600 0,100 0,045
S450GD +Z, +ZM, +AZ 0,200 1,700 0,600 0,100 0,045
S550GD +Z, +ZM, +AZ 0,200 1,700 0,600 0,100 0,045

 

Legenda dei rivestimenti:

+Z= Rivestimento con lega di zinco, con contenuto in Zinco >=99%

+ZM= Rivestimento con lega di Alluminio, Zinco con contenuto tra l’1,5% e l’8%, con contenuto minimo di Magnesio dello 0,2% ed il resto Zinco.

+AZ= Rivestimento con lega di Alluminio, Silicio e zinco, con contenuto di Alluminio del 55%, di Silicio dell’1,6% ed il resto Zinco.

+AS= Rivestimento con lega di Alluminio e Silicio, con contenuto di Silicio dell’11% ed il resto Alluminio

Sei interessato a questo tipo di aggiornamento?

Non perdertene uno e iscriviti alla newsletter Sangoi!

    Subscribe to the newsletter

    I declare that I have read and accepted the Information on the processing of personal data(*)
    I consent to direct marketing activities, including the sending of newsletters, as provided for in the Privacy Policy.